Product Info

8
FOUP Read/Write Station – Stand Alone, Release 1.0
Do not position the device in a location where it can
suffer from vibration or shock.
When the device is installed, the installation location
must be adequately illuminated.
Do not install the device during periods of lightning.
Ensure the installation location complies with FCC
requirements for human exposure to radio frequency.
 When determining the assembly location, consider the
length of the antenna cable that will be used, and the
reading and writing range. See section
„Accessories/Antennas“ for further information.
3.2 Qualified Installation Personnel
The installation shall be carried out by specially trained personnel only.
If you are uncertain about the qualification, contact the manufacturer.
3.3 Unpacking
This device and its accessories were packed under clean room
conditions. To preserve these conditions, the device must be unpacked
under clean room conditions.
The packing material consists of cardboard and film. Dispose of these
materials separately in accordance with the relevant legislation in your
country.