User's Manual

PC-Card Transponder Reader – Release 1.0
HERMOS Informatik GmbH, 95490 Mistelgau, Germany
Page 16 of 17
2002-09-04
ID: ID020064
Writing to a ‘Read/Write’ Transponder
The data bytes 1-8 contain the transponder data for writing.
Command: 08H
Message:
Length Header Transponder Data (8 bytes) Chksum
Response:
Length Header Acknowledge Code Chksum
Writing to a Multipage Transponder
The first data byte contains the page of the multipage transponder to which shall be
written. Byte 2 up to byte 9 contain the page data of the page specified in byte 1.
Command: 09H
Message:
Length Header Page Number (01-11 Hex) Page Data (8 bytes) Chksum
Response:
Length Header Acknowledge Code Chksum
Types of Transponder
This item is used in command ‘01H’ and ‘02H’.
0x00 NONE
0x01 READ_ONLY
0x02 READ_WRITE
0x03 MULTI_PAGE_Read_unlocked
0x04 MULTI_PAGE_Programming
0x05 MULTI_PAGE_Read_locked
0x06 READ_WRITE_Programming
0x07 RW_FAIL