User's Manual

Product Manual - RFID Reader LF60C SoliD 91
Chapter 7
Operation
The cassette identifier that has been read or will be written. The PAGEDATA
corresponds to the value of a transponder page.
PAGEDATA [0] Corresponds to the page number. The value of the page
number is displayed in the data item "PAGE_ID".
PAGEDATA [1] The 8 bytes (one page) of the transponder ID follow.
PAGEDATA [8]
Where used S3F7, S3F12, S3F13, S3F65
Information about the status of up to two sensors and the initiator of the
message.
The second sensor is not implemented yet.
For special applications, the reading process of the transponder reader is
triggered by two sensors. In this case it is necessary to distinguish between the
two sensors. The initiator represents the number of the sensor that has caused
the message.
Default: Only sensor 0 is defined.
bit 7 ........ bit 0
Initiator Sensor 1 Sensor 0
Sensor 0: bit 0 - bit 2
The current status of sensor 0 is described in three bits.
0 Sensor not occupied
1 Sensor occupied
7 Sensor not defined
Sensor 1: bit 3 - bit 5 (defined for future developments)
The current status of sensor 1 is described in three bits.
0 Sensor not occupied
1 Sensor occupied
7 Sensor not defined
Initiator: bit 6 - bit 7
The initiator represents the number of the sensor that has caused the message.
0Sensor 0
1 Sensor 1 (not implemented yet)
3 Cannot be assigned
Where used S3F5, S3F7, S3F12, S3F13, S3F67
PAGEDATA Format: B[9]
PIN Format: B[1]