User's Manual
Table Of Contents
- 1 Identification
- 2 Declaration of Conformity
- 3 General Instructions
- 4 Safety Instructions
- 5 Product Specifications
- 6 Installation
- 7 Operation
- 7.1 Operating personnel
- 7.2 Protocol change
- 7.3 Operation of the ASC-I1 protocol
- 7.3.1 Structure of the communication protocol
- 7.3.2 Package contents
- 7.3.3 Commands of protocol
- Commands host to reader
- Commands reader to host
- Message items
- X - Read data
- W - Write data
- R - Automatic read
- G - Request parameter value
- P - Set parameter
- N - Reset
- e - Error message
- H - Heartbeat
- V - Query software version
- L - Lock a page of the transponder
- I - Set tuning of the RF module
- J - Request tuning settings of RF module
- A - Sensor event
- 7.3.4 Parameters
- 7.3.5 Message examples
- 7.4 Operation of SECS/HSMS Protocol
- 7.4.1 Introduction
- 7.4.2 SECS-I implementation
- 7.4.3 HSMS option
- 7.4.4 HSMS implementation
- 7.4.5 SECS-II implementation
- 7.4.6 Parameters
- Parameter 0 (0x00)
- Parameter 1 (0x01)
- Parameter 2 (0x02)
- Parameter 3 (0x03)
- Parameter 4 (0x04)
- Parameter 5 (0x05)
- Parameter 6 (0x06)
- Parameter 7 (0x07)
- Parameter 8 (0x08)
- Parameter 9 (0x09)
- Parameter 11 (0x0B)
- Parameter 12 (0x0C)
- Parameter 20 (0x14)
- Parameter 22 (0x16)
- Parameter 23 (0x17)
- Parameter 24 (0x18)
- Parameter 25 (0x19)
- Parameter 26 (0x1A)
- Parameter 27 (0x1B)
- Parameter 29 (0x1D)
- Parameter 30 (0x1E)
- Parameter 31 (0x1F)
- Parameter 32 (0x20)
- Parameter 33 (0x21)
- Parameter 34 (0x22)
- Parameter 35 (0x23)
- Parameter 36 (0x24)
- Parameter 37 (0x25)
- Parameter 38 (0x26)
- Parameter 40 (0x28)
- Parameter 41 (0x29)
- Parameter 42 (0x2A)
- Parameter 43 (0x2B)
- Parameter 44 (0x2C)
- Parameter 45 (0x2D)
- Parameter 98 (0x62)
- Parameter 99 (0x63)
- 7.4.7 SEMI E99
- 7.4.8 Message details
- 7.4.9 HSMS message examples
- 7.4.10 SECS-I message examples
- 8 Service and Troubleshooting
- 9 Dismantling and Storage
- 10 Transport and Disposal
- 11 Accessories
Product Manual - RFID Reader LF60C SoliD 84
Chapter 7
Operation
"ECID_06" parameter 6 - Retry-limit RTY
"ECID_07" parameter 7 - TARGETID high byte
"ECID_08" parameter 8 - TARGETID low byte
"ECID_09" parameter 9 - Heartbeat time
"ECID_10" parameter 10 - FIX
"ECID_11" parameter 11 - Reader ID
"ECID_12" parameter 12 - HeadID
"ECID_20" parameter 20 - Sensor delay for presence sensor
"ECID_22" parameter 22 - Sensor triggered action for presence sensor
"ECID_23" parameter 23 - Triggered read frequency
"ECID_24" parameter 24 - R/W max repeat
"ECID_25" parameter 25 - Transponder type
"ECID_26" parameter 26 - Sensor activity
"ECID_27" parameter 27 - Watchport for presence
"ECID_29" parameter 29 - Transponder load duration (read mode)
"ECID_30" parameter 30 - r/w synchronize
"ECID_31" parameter 31 - Auto-adjust value (read mode)
"ECID_32" parameter 32 - Auto-adjust value (write mode)
"ECID_33" parameter 33 - Automatic antenna adjustment
"ECID_34" parameter 34 - Sensor type for presence sensor
"ECID_35" parameter 35 - Special features
"ECID_36" parameter 36 - DIP switch activation
"ECID_37" parameter 37 - MID area
"ECID_38" parameter 38 - Test after software reset
"ECID_40" parameter 40 - Transponder load duration (write mode)
"ECID_41" parameter 41 - Delay time between read cycles
"ECID_42" parameter 42 - CarrierIDOffset
"ECID_43" parameter 43 - CarrierIDLength
"ECID_44" parameter 44 - FixedMID
"ECID_45" parameter 45 - MIDFormat
"ECID_98" parameter 98 - Protocol change allowed
"ECID_99" parameter 99 - Customer code
Head attribute definitions: *
"HeadStatus" The current status
"HeadID" Head number 00-31 (2 digits)
* With regard to an RFID Reader LF60C SoliD, the head attribute definition
"HeadStatus" is equal to the "OperationalStatus" of the CIDRW.
Where used S18F1, S18F3