User's Manual
Table Of Contents
- 1 Identification
- 2 Declaration of Conformity
- 3 General Instructions
- 4 Safety Instructions
- 5 Product Specifications
- 6 Installation
- 7 Operation
- 7.1 Operating personnel
- 7.2 Protocol change
- 7.3 Operation of the ASC-I1 protocol
- 7.3.1 Structure of the communication protocol
- 7.3.2 Package contents
- 7.3.3 Commands of protocol
- Commands host to reader
- Commands reader to host
- Message items
- X - Read data
- W - Write data
- R - Automatic read
- G - Request parameter value
- P - Set parameter
- N - Reset
- e - Error message
- H - Heartbeat
- V - Query software version
- L - Lock a page of the transponder
- I - Set tuning of the RF module
- J - Request tuning settings of RF module
- A - Sensor event
- 7.3.4 Parameters
- 7.3.5 Message examples
- 7.4 Operation of SECS/HSMS Protocol
- 7.4.1 Introduction
- 7.4.2 SECS-I implementation
- 7.4.3 HSMS option
- 7.4.4 HSMS implementation
- 7.4.5 SECS-II implementation
- 7.4.6 Parameters
- Parameter 0 (0x00)
- Parameter 1 (0x01)
- Parameter 2 (0x02)
- Parameter 3 (0x03)
- Parameter 4 (0x04)
- Parameter 5 (0x05)
- Parameter 6 (0x06)
- Parameter 7 (0x07)
- Parameter 8 (0x08)
- Parameter 9 (0x09)
- Parameter 11 (0x0B)
- Parameter 12 (0x0C)
- Parameter 20 (0x14)
- Parameter 22 (0x16)
- Parameter 23 (0x17)
- Parameter 24 (0x18)
- Parameter 25 (0x19)
- Parameter 26 (0x1A)
- Parameter 27 (0x1B)
- Parameter 29 (0x1D)
- Parameter 30 (0x1E)
- Parameter 31 (0x1F)
- Parameter 32 (0x20)
- Parameter 33 (0x21)
- Parameter 34 (0x22)
- Parameter 35 (0x23)
- Parameter 36 (0x24)
- Parameter 37 (0x25)
- Parameter 38 (0x26)
- Parameter 40 (0x28)
- Parameter 41 (0x29)
- Parameter 42 (0x2A)
- Parameter 43 (0x2B)
- Parameter 44 (0x2C)
- Parameter 45 (0x2D)
- Parameter 98 (0x62)
- Parameter 99 (0x63)
- 7.4.7 SEMI E99
- 7.4.8 Message details
- 7.4.9 HSMS message examples
- 7.4.10 SECS-I message examples
- 8 Service and Troubleshooting
- 9 Dismantling and Storage
- 10 Transport and Disposal
- 11 Accessories
Contents
6.4 Assembly of the device 30
6.5 Antenna installation 31
6.5.1 Positioning the antenna 31
6.5.2 Available antenna types 32
6.5.3 Dimensions for planning 32
6.6 Connecting the transponder reader 33
6.7 Power/RS485 bus connection 34
6.8 RS232 connection 35
6.9 Commissioning 35
6.9.1 Required operating conditions 35
6.9.2 Parameters of the serial interface 35
6.10 Ethernet connection 36
6.11 Input and output 37
6.12 DIP switches 38
7 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
7.1 Operating personnel 39
7.2 Protocol change 39
7.2.1 General remarks 39
7.2.2 Automatic protocol recognition (default) 40
7.2.3 Protocol switchover using DIP switches 40
7.2.4 Protocol setting using DIP switches 40
7.3 Operation of the ASC-I1 protocol 41
7.3.1 Structure of the communication protocol 41
7.3.2 Package contents 41
7.3.3 Commands of protocol 43
7.3.4 Parameters 60
7.3.5 Message examples 62
7.4 Operation of SECS/HSMS Protocol 64
7.4.1 Introduction 64
7.4.2 SECS-I implementation 65
7.4.3 HSMS option 69
7.4.4 HSMS implementation 69
7.4.5 SECS-II implementation 76
7.4.6 Parameters 96
7.4.7 SEMI E99 107
7.4.8 Message details 111