User's Manual
Table Of Contents
- 1 Identification
- 2 Declaration of Conformity
- 3 General Instructions
- 4 Safety Instructions
- 5 Product Specifications
- 6 Installation
- 7 Operation
- 7.1 Operating personnel
- 7.2 Protocol change
- 7.3 Operation of the ASC-I1 protocol
- 7.3.1 Structure of the communication protocol
- 7.3.2 Package contents
- 7.3.3 Commands of protocol
- Commands host to reader
- Commands reader to host
- Message items
- X - Read data
- W - Write data
- R - Automatic read
- G - Request parameter value
- P - Set parameter
- N - Reset
- e - Error message
- H - Heartbeat
- V - Query software version
- L - Lock a page of the transponder
- I - Set tuning of the RF module
- J - Request tuning settings of RF module
- A - Sensor event
- 7.3.4 Parameters
- 7.3.5 Message examples
- 7.4 Operation of SECS/HSMS Protocol
- 7.4.1 Introduction
- 7.4.2 SECS-I implementation
- 7.4.3 HSMS option
- 7.4.4 HSMS implementation
- 7.4.5 SECS-II implementation
- 7.4.6 Parameters
- Parameter 0 (0x00)
- Parameter 1 (0x01)
- Parameter 2 (0x02)
- Parameter 3 (0x03)
- Parameter 4 (0x04)
- Parameter 5 (0x05)
- Parameter 6 (0x06)
- Parameter 7 (0x07)
- Parameter 8 (0x08)
- Parameter 9 (0x09)
- Parameter 11 (0x0B)
- Parameter 12 (0x0C)
- Parameter 20 (0x14)
- Parameter 22 (0x16)
- Parameter 23 (0x17)
- Parameter 24 (0x18)
- Parameter 25 (0x19)
- Parameter 26 (0x1A)
- Parameter 27 (0x1B)
- Parameter 29 (0x1D)
- Parameter 30 (0x1E)
- Parameter 31 (0x1F)
- Parameter 32 (0x20)
- Parameter 33 (0x21)
- Parameter 34 (0x22)
- Parameter 35 (0x23)
- Parameter 36 (0x24)
- Parameter 37 (0x25)
- Parameter 38 (0x26)
- Parameter 40 (0x28)
- Parameter 41 (0x29)
- Parameter 42 (0x2A)
- Parameter 43 (0x2B)
- Parameter 44 (0x2C)
- Parameter 45 (0x2D)
- Parameter 98 (0x62)
- Parameter 99 (0x63)
- 7.4.7 SEMI E99
- 7.4.8 Message details
- 7.4.9 HSMS message examples
- 7.4.10 SECS-I message examples
- 8 Service and Troubleshooting
- 9 Dismantling and Storage
- 10 Transport and Disposal
- 11 Accessories
Product Manual - RFID Reader LF60C SoliD 135
Chapter 7
Operation
Host writes new reader attributes with S18F3
Host to Reader: S18F3
15:18:14 Outgoing: ENQ ( 05 )
15:18:14 Incoming: EOT ( 04 )
15:18:14 Outgoing: Length Byte ( 8E )
15:18:14 Outgoing: Header ( 01 34 92 03 80 01 00 00 00 44 )
15:18:14 Outgoing: Data ( 01 02 41 02 30 31
01 06
01 02
41 0D 43 6F 6E 66 69 67 75 72 61 74 69 6F 6E
41 02 30 31
01 02
41 11 4F 70 65 72 61 74 69 6F 6E 61 6C 53 74 61 74 75 73 41 04 49 44 4C 45
01 02
41 0B 41 6C 61 72 6D 53 74 61 74 75 73
41 01 31
01 02
41 0F 43 61 72 72 69 65 72 49 44 4F 66 66 73 65 74
41 01 30
01 02
41 06 48 65 61 64 49 44 41 01 31 01 02
41 0F 43 61 72 72 69 65 72 49 44 4C 65 6E 67 74 68
41 02 31 30 )
15:18:14 Outgoing: Checksum ( 26 62 )
15:18:14 Incoming: ACK ( 06 )
Reader to Host: S18F4
15:18:14 Incoming: ENQ ( 05 )
15:18:14 Outgoing: EOT ( 04 )
15:18:14 Incoming: Length Byte ( 2B )
15:18:14 Incoming: Header ( 81 34 12 04 80 01 00 00 00 44 )
15:18:14 Incoming: Data ( 01 03 41 02 30 31)
15:18:14 Incoming: Data ( 41 02 4E 4F)
15:18:14 Incoming: Data (01 01)
15:18:14 Incoming: Data (01 04)
15:18:14 Incoming: Data (41 02 4E 45)
15:18:14 Incoming: Data (41 01 31)
15:18:14 Incoming: Data (41 04 49 44 4C 45)
15:18:14 Incoming: Data (41 04 49 44 4C 45)
15:18:14 Incoming: Checksum ( 07 2E )
15:18:14 Outgoing: ACK ( 06 )
The host writes all fundamental CIDRW attributes defined in ATTRID.
The reader answers with the actual attribute values.