User's Manual

Product Manual - RFID Reader LF60C SoliD 129
Chapter 7
Operation
The reader sends the message S3F13 after the sensor was detected
and the transponder could be read
Reader to Host: S3F13
15:51:46 Incoming: ENQ ( 05 )
15:51:46 Outgoing: EOT ( 04 )
15:51:46 Incoming: Length byte ( 1A )
15:51:46 Incoming: Header ( 81 FF 83 0D 80 01 00 03 00 05 )
15:51:46 Incoming: Data
01 02
21 01 39  Initiator=0, Sensor 0=1
21 09 81 11 11 11 11 10 00 00 00
PAGEDATA
15:51:46 Incoming: Checksum ( 03 F6 )
15:51:46 Outgoing: ACK ( 06 )
Host to Reader: S3F14
15:51:46 Outgoing: ENQ ( 05 )
15:51:46 Incoming: EOT ( 04 )
15:51:46 Outgoing: Length byte ( 0D )
15:51:46 Outgoing: Header ( 01 FF 03 0E 80 01 00 03 00 05 )
15:51:46 Outgoing: Data ( 21 01 00 )  ACKC3
15:51:46 Outgoing: Checksum ( BD 01 )
15:51:46 Incoming: ACK ( 06 )
The material ID acknowledgement MIDAC depends on the sensor status PTN. The
initiator was the sensor 0 and the host acknowledges with "0".
The reader sends the message S3F7 after the cassette was
removed from the sensor.
Reader to Host: S3F7
15:51:52 Incoming: ENQ ( 05 )
15:51:52 Outgoing: EOT ( 04 )
15:51:52 Incoming: Length byte ( 1D )
15:51:52 Incoming: Header ( 81 FF 83 07 80 01 00 03 00 06 )
15:51:52 Incoming: Data
01 03
21 01 20MF 0x20
21 01 38 Initiator=0, Sensor 0=0
21 09 81 11 11 11 11 10 00 00 00
Last read PAGEDATA
15:51:52 Incoming: Checksum ( 04 34 )
15:51:52 Outgoing: ACK ( 06 )