User's Manual

OPERATION 5
59
Transponder Reader LF60 Gen2 (SECS1-Protocol), Release 0.2
Parameter 41: delay time between read cycle
The delay time between two reading cycles. It takes care of the reading
module lifetime.
To increase reading speed, set the delay time to zero.
00 .. 20 50ms
Default: (2) 100ms
Parameter 42: CarrierIDOffset
Defines the offset of the CID within the CID field (MID area –
parameter 37).
The valid value range depends on the value of the MID area and the
value of CarrierIDLength.
Valid range: 0 … maximum bytes of CID -1
Default: 0
Offset + Length can not be larger than the length of CID field.
Parameter 43: CarrierIDLength
Defines the length of the CID within the CID field (MID area –
parameter 37).
The valid value range depends on the value of the MID area and the
value of CarrierIDOffset. (see parameter 42: CarrierIDOffset)
Valid range: 1 … maximum bytes of CID field
Default: 16