User's Manual

5 OPERATION
56
Transponder Reader LF60 Gen2 (SECS1-Protocol), Release 0.2
Parameter 25: transponder type
This parameter defines the validity of the read transponder data.
00 ... Read and write TIRIS type
Each transponder page consists of 8 data bytes.
The validity of the data bytes is checked by a 2
byte CRC checksum.
01 … Read and write free type
Each transponder type consists of 10 data bytes.
The validity of the data bytes is not checked by
checksum.
02 … Read free type without TIRIS type
If the tag has a valid TIRIS format (valid
checksum) a tag error occurs.
Default: 00
Parameter 26: sensor activity
The transponder reader offers the option of deactivating the connected
sensor.
0 Sensor not activated
1 Sensor activated
Default: 1
Parameter 27: watchport for presence sensor
Enables a message to the host if a cassette/FOUP is detected on the I/O
port, or if it is removed from I/O port.
A sensor is required to use this capability!
0 Report nothing
1 Report cassette/FOUP is removed
2 Report cassette/FOUP is detected
3 Report cassette/FOUP is detected and cassette is removed
Default: (3) Report cassette/FOUP is detected and removed