User's Manual

4 INSTALLATION
32
Transponder Reader LF60 Gen2 (SECS1-Protocol), Release 0.2
4.10 DIP-Switches
The DIP switches can be used to change the behavior of some features
of the reader.
DIP-switch 1: not used in the current firmware version
DIP-switch 2: Start antenna tuning (see parameter 13)
OFF: Normal operation mode
ON: Switching from OFF to ON the reader starts an
automatic tuning of the connected antenna
DIP-switch 3: Test-Mode
OFF: Normal operation mode
ON: Reader is in test mode (see 4.12)
DIP-switch 4: Behavior for test mode
OFF: Read action in test mode
ON: Write action in test mode