User's Manual

4 INSTALLATION

Transponder Reader LF60 Gen2 (SECS1-Protocol), Release 0.2

4.6 Connecting the Transponder Reader

4.6.1 Antenna

Connect the antenna to the antenna connector (see illustration page

16).

4.7 Power Connection

Built-in male plug, plastic (power supply)

The device can be connected to an interior DC power circuit of the

equipment or to a DC adapter (see section “Accessories”).

Note the required voltage (see technical data, page 19). Use

cables, plugs and adapters provided by the manufacturer

only!

Once the device is connected to the power supply, the power LED is

illuminated (see illustration page 16). If it is not illuminated, see

section 6 for help.

PIN Signal

1 +24V

2 0V

3 Screen / PE