User's Manual

4 INSTALLATION

Transponder Reader LF60 Gen2 (SECS1-Protocol), Release 0.2

4.4.2 Standard Housing

4.4.2.1 Required Materials and Tools

 Four cylinder head screws

 Four dowels (in case of wall mounting)

 Appropriate screwdriver

 Drilling machine with fitting drill

4.4.2.2 Assembly

1 Drill four holes (see dimensions on page 23).

2 When mounting the device on a wall, insert four dowels.

3 Screw the device onto the assembly surface.

4 Connect the device as described in section “Connecting” (page

30).