User's Manual
Table Of Contents
- Product Manual RFID Reader LF40C THR
- 1 Identification
- 2 Declaration of Conformity
- 3 General Instructions
- 4 Safety Instructions
- 5 Product Specifications
- 6 Installation
- 7 Operation
- 7.1 Operating personnel
- 7.2 Normal operating mode
- 7.3 Setup mode
- 7.3.1 Parameter
- Parameter 0 (0x00)
- Parameter 6 (0x06)
- Parameter 32 (0x20)
- Parameter 33 (0x21)
- Parameter 34 (0x22)
- Parameter 35 (0x23)
- Parameter 39 (0x27)
- Parameter 80 (0x50)
- Parameter 81 (0x51)
- Parameter 82 (0x52)
- Parameter 83 (0x53)
- Parameter 85 (0x55)
- Parameter 86 (0x56)
- Parameter 97 (0x61)
- Parameter 98 (0x62)
- Parameter 99 (0x63)
- 7.3.1 Parameter
- 7.4 Status diagram as overview
- 7.5 Flow chart
- 7.6 ASCII values for setup
- 8 Service and Troubleshooting
- 9 Dismantling and Storage
- 10 Transport and Disposal
- Index
Product Manual - RFID Reader LF40C THR 7
Chapter 1
Identification
1 Identification
This chapter gives you an overview of the following topics:
■ Model
■ Designated use
■ Incorrect use
1.1 Model
LF40C THR
Serial number e. g. 1301MIS10017
Part number TLH-U2K-0R30-SM-0010 (cable length of 3 m, smooth cable)
TLH-U2K-0R50-SM-0010 (cable length of 5 m, smooth cable)
TLH-U2K-0R50-SM-0020 (cable length of 5 m, coiled cable)
Manufacturer
Brooks Automation (Germany) GmbH
RFID Division
Gartenstr. 19
D-95490 Mistelgau
GERMANY
Telephone +49 (0) 9279 - 991 550
Fax +49 (0) 9279 - 991 501
E-mail info.rfid@brooks.com
Website www.brooks-rfid.com
For information on the label, see
Device label.
1.2 Designated use
This product is exclusively developed for reading and writing of transponders. Any
other use of this device constitutes misuse and renders the user's authority to
install and operate the device invalid.