User's Manual

Product Manual - RFID Reader LF40C THR 36
Chapter 7
Operation
Parameter 80
(0x50)
AddTabCR
This parameter determines whether a Carriage Return or a TAB - or both - is
added at the end of the read result.
Values:
none - 00 – do not add CR or TAB
add CR - 01 – add CR
add Tab - 02 – add TAB
add CR Tab - 03 – add CR and TAB
Default: add CR (01)
Parameter 81
(0x51)
ASCIICoded
The read data can be displayed in HEX or ASCII format.
Values:
HEX - 00 – HEX
ASCII - 01 – ASCII
Default: ASCII - 01
Parameter 82
(0x52)
Prefix
This parameter determines whether an additional character is to be placed in
front of the read result. These are shown in the chapter
 ASCII values for setup.
Values:
0….0x80 - HEX code for desired prefix
Default: 0 (no prefix)
Parameter 83
(0x53)
Suffix
This parameter determines whether an additional character is to be placed after
the read result (suffix). These are shown in the chapter
 ASCII values for setup.
These settings can influence the display of data on the screen.
Values:
0….0x80 - HEX code for desired suffix
Default: 0 (no suffix)
ATTENTION
When using Microsoft Word, the numlock key has to be activated so that prefix
or suffix control characters can be interpreted correctly.