User's Manual

Product Manual - RFID Reader LF40C THR 33
Chapter 7
Operation
Parameter 0
(0x00)
Customer
Defines whether the reader is configured with the standard settings of the
parameters or with customer-specific settings.
Values:
Standard = 00
Customer mode 1 = 01
Customer mode 2 = 02
Default: 00
If the reader is in customer mode 1, the following parameters differ from the
standard settings:
Parameter 0x21  00
Parameter 0x50  add Tab
Parameter 0x55  English
If the reader is in customer mode 2, the following parameters differ from the
standard settings:
Parameter 0x21  00
Parameter 0x52  19
Parameter 0x55  English
Furthermore, the setup menu is blocked as soon as the reader has entered
customer mode 1. To unblock the setup menu, press the following button
combination: Press and hold the set button while pressing the read button three
times. Then stop pressing the set button. The parameter menu is displayed again.
Parameter 6
(0x06)
Retry
Determines the internal repetitions of the read operation if the read operation has
not been successful.
Values:
00… 1F (0 to 31)
Default: 03
97 0x61  ShowNoneVisibleASCII
98 0x62  NumPrefix
99 0x63  NumSuffix
No.
(dec.)
No.
(hex)
Parameter name