User's Manual

Product Manual - RFID Reader LF40C THR 32
Chapter 7
Operation
7.3 Setup mode
To enter setup mode, connect the device as described in the chapter
 Connecting the RFID reader, and start a text editor (we recommend Editor or
WordPad, Numlock activated). Then press the set button on the reader until the
setup menu appears in the editor (see
 Foil keypad). The Setup menu can be
specially protected, depending on the settings of  Parameter 0 (0x00).
The reader switches to setup mode. On the screen, this is indicated by the
following line (software version can differ):
Software:
USBL_V30
Parameter Select
The settings in setup mode are adjusted via the read button and the set button
(press as well as press and hold).
A flow chart of the setup is illustrated in the chapter
 Flow chart.
7.3.1 Parameter
No.
(dec.)
No.
(hex)
Parameter name
0 0x00  Customer
6 0x06  Retry
32 0x32  ShowTagType
33 0x21  ReadPage
34 0x22  ReadLength
35 0x23  MIDFormat
39 0x27  Polling
80 0x50  AddTabCR
81 0x51  ASCIICoded
82 0x52  Prefix
83 0x53  Suffix
85 0x55  Language
86 0x56  Buzzer