User's Manual

OPERATION 5
73
HF80 Transponder Reader – HSMS, Release 1.3
TARGETID
Format: A[max10]
Description: Identifies where a request for action or data is to be
applied. The TARGETID corresponds to the last four
characters of the serial number on a label on top of the
reader.
The reader uses the 2 digit HeadID as TARGETID
to address the right antenna connector.
See also reader parameter definitions (data item ECV)
parameter 7 and 8.
Example : “H8-xxxx-TS” (xxxx … dependent on the individual
reader)
The 4 ASCII character TARGETID xxxx is set by
delivery (is used as serial number).
The predefined TARGETID is fixed and cannot be
changed.
The 2 ASCII character HeadID corresponds to the
antenna connectors 01 - 05.
Where used: all stream 18 messages
UID
Format: B[8-12]
Description: Unified identifier of the tag.
In case of ISO15693 the UID has a length of 8 Bytes.
Where used: S18F66, S18F67, S18F69, S18F73, S18F75