User's Manual

5 OPERATION
66
HF80 Transponder Reader – HSMS, Release 1.3
Parameter 99: custom code
If the customer requires special parameter settings that deviate from
the default values, a customer code can be assigned by BROOKS to set
several parameter values via one parameter. Parameter 99 will not be
stored in the reader and can not be read out. The following values are
defined to change several parameters in one step.
0x04 … Settings for Philips ICS20 tag
0x05 … Settings for Infineon tag
0x07 … Settings for TI tag (Tag-it)
0x85 … Settings for Infineon My D Light
0x00 … Resets all parameters to default settings
) Attention! After reset all parameter to default settings the
reader performs a hardwarereset!
These settings change the following parameters:
Parameter 99 = 0x04
Parameter# Value
32 – Tag type 0x04
37 – MID area 0x04
53 – Readmode Low
54 – Writemode Low
Parameter 99 = 0x05
Parameter# Value
32 – Tag type 0x05
37 – MID area 0x02
53 – Readmode Low
54 – Writemode High