User's Manual

OPERATION 5
61
HF80 Transponder Reader – HSMS, Release 1.3
Parameter 27: watchport for presence sensor 2
See parameter 26.
Parameter 28: watchport for presence sensor 3
See parameter 26.
Parameter 29: watchport for presence sensor 4
See parameter 26.
Parameter 30: watchport for presence sensor 5
See parameter 26.
Parameter 31: r/w maxrepeat
If a read/write error occurs, this parameter defines the maximum
number of attempts to read or write a transponder.
0 .. 5
Default: 5
Parameter 32: type of transponder
Defines the type of tag. The type is used in case of some reading and
writing messages which do not use the UID to identify the type of the
tag. Therefore, the device has to know the type of tag before trying to
read or write. If a tag of another type supports the same messages like
the defined type, the reader can read/write this tag too.
0x04 … Philips ICS20
0x05 … Infineon tag
0x07 … TI tag (Tag-it)
0x85 … Infineon My D Light
Default: 5 (Infineon tag)