User's Manual

4 INSTALLATION
28
HF80 Transponder Reader – HSMS, Release 1.3
4.11 Starting Up
4.11.1 Required Operating Conditions
To operate the reader, the following requirements must be met:
) An antenna must be connected correctly to the reader.
) The power supply must be connected (except POE is used).
) The transponder must be located within the individual
reading/writing range of the antenna.
) Setting of the DIP switches is correct.
4.11.2 Parameter of Serial Interface
Baud rate 19200
Databits 8
Stopbit 1
Parity none