User's Manual

INSTALLATION 4

HF80 Transponder Reader – HSMS, Release 1.3

4.6 Connecting the Transponder Reader

4.6.1 Antenna

Connect the antenna to the antenna plug (see illustration page 17).

4.7 Power Connection

Built-in male plug, plastic (power supply)

PIN Signal

1 +24V

2 0V

3 Screen / PE

The device can be connected to an interior DC power circuit of the

equipment or to a DC adapter (see section “Accessories”, page 147).

Note the required voltage (see technical data, page 20). Use

cables, plugs and adapters provided by the manufacturer

only!

Once the device is connected to the power supply, the power LED is

illuminated (see illustration page 17). If it is not illuminated, see

section 6 for help.

Take care that you connect only one type of power supply

to the reader at the same time. PoE (via Ethernet cable)

or external power supply, but not both together.

Otherwise the reader hardware or the external power

supply can be damaged.