User's Manual

SERVICE AND ERROR HANDLING 6
141
HF80 Transponder Reader – HSMS, Release 1.3
6 SERVICE AND ERROR HANDLING
6.1 General
) The transponder reader and its components must be serviced by
the manufacturer only.
) If errors occur, follow the instructions in this section. Do not
carry out any error eliminating measures other than the ones
described in this section.
) If you are uncertain about errors and their handling, contact
the manufacturer (see the contact information on page 144 of
this manual). Have the serial number of the transponder reader
ready as shown on the label (see page 19) when contacting the
manufacturer.
6.2 Qualified Error Handling Personnel
Error handling shall be carried out by specially trained personnel only.
If you are uncertain about the qualifications that are required, contact
the manufacturer.
Error handling the device without the special skills required
and unqualified interference with the device can result in
personal injury and damage to the reader and/or connected
devices!