User's Manual

2 SAFETY INSTRUCTIONS

HF80 Transponder Reader – HSMS, Release 1.3

2.4 Proper Use

This product was developed for reading and writing transponders only.

Any other use of this device would constitute abuse and would render

the user’s authority to install and operate the device invalid.

This product is designed to be mounted and operated in an industrial

environment as a built-in-device only. It is not designed to be used as a

stand-alone or a portable device or in a non-industrial environment,

such as a household, vehicle or open-air environment.

2.5 Qualified Personnel

This manual is designed for specially trained personnel only. This

device must be installed and maintained by the manufacturer or its

specially trained representatives.

Intervention or error handling not expressively approved in this manual

must be carried out by the manufacturer’s personnel only. If you are

unsure about the qualifications that are actually required, contact the

manufacturer.

Unqualified interventions may result in personal injury or

damage to the device!