User's Manual

OPERATION 5
67
HF5x Transponder Reader (SECS1-Protocol), Release 1.4
S2F16: NEW EQUIPMENT CONSTANT ACKNOWLEDGE
(reader -> host)
The reader acknowledges the setting of the reader constant.
S2F16
< EAC>.
S2F19: RESET SEND (host -> reader, reply)
The host requests the reader to reset the hardware and software.
If a heartbeat time is set (parameter 9) the reader sends a S1F1
message when the reset was finished.
The power up reset requires a few seconds.
S2F19 W
< RIC>.
S2F20: RESET ACKNOWLEDGE (reader -> host)
The reader acknowledges the reset (only in case of software reset).
In case of a power up reset, the reader sends no S2F20 message.
S2F20
< RAC>.