User's Manual

OPERATION 5
49
HF5x Transponder Reader (SECS1-Protocol), Release 1.4
Parameter 27: watchport for presence sensor 2
See parameter 26.
Parameter 28: watchport for presence sensor 3
See parameter 26.
Parameter 29: watchport for presence sensor 4
See parameter 26.
Parameter 30: watchport for presence sensor 5
See parameter 26.
Parameter 31: r/w maxrepeat
If a read/write error occurs, this parameter defines the maximum
number of attempts to read or write a transponder.
0 .. 5
Default: 5
Parameter 32: type of transponder
Defines the type of the transponder. The type of tag is needed for the
messages S18F5, S18F7, S18F9 and S18F11. Because of these
messages do not use the UID of the tag, the transponder reader have to
know the type of the tag to perform reading and writing.
0x05 … Infineon tag
0x07 … TI tag
Default: 5