User's Manual

5 OPERATION

HF5x Transponder Reader (SECS1-Protocol), Release 1.4

Parameter 26: watchport for presence sensor 1

Enables a message to the host if a cassette/FOUP is detected on the I/O

port, or if it is removed from I/O port.

A sensor is required to use this capability!

Bit 0: 0 – Report cassette/FOUP removed is disabled

1 – Report cassette/FOUP removed is enabled

Bit 1: 0 – Report cassette/FOUP detected is disabled

1 – Report cassette/FOUP detected is enabled

Bit 2 – 5: not used!

Bit 6: 0 – Message S18F71 expects no reply message

1 – Message S18F71 expects a reply message

Bit 7: 0 – The input signal is not inverted (normal)

1 – The input signal is inverted

Input signal is normal(Bit 7) and no reply is expected (Bit 6):

0x00000000 Report nothing

0x00000001 Report cassette/FOUP is removed

0x00000010 Report cassette/FOUP is detected

0x00000011 Report cassette/FOUP is detected and cassette

is removed

Input signal is inverted (Bit 7) and a reply is expected (Bit 6):

0x11000000 Report nothing

0x11000001 Report cassette/FOUP is removed

0x11000010 Report cassette/FOUP is detected

0x11000011 Report cassette/FOUP is detected and cassette

is removed

Default: 0x00000011 (3)