User's Manual

OPERATION 5
41
HF5x Transponder Reader (SECS1-Protocol), Release 1.4
“ECID_22”  parameter 22 – sensor 2 delay
“ECID_23”  parameter 23 – sensor 3 delay
“ECID_24”  parameter 24 – sensor 4 delay
“ECID_25”  parameter 25 – sensor 5 delay
“ECID_26”  parameter 26 – watchport for sensor 1
“ECID_27”  parameter 27 – watchport for sensor 2
“ECID_28”  parameter 28 – watchport for sensor 3
“ECID_29”  parameter 29 – watchport for sensor 4
“ECID_30”  parameter 30 – watchport for sensor 5
“ECID_31”  parameter 31 – r/w max repeat
“ECID_32”  parameter 32 – type of transponder
“ECID_37”  parameter 37 – MID area
“ECID_38”  parameter 38 – Test after software reset
“ECID_42”  parameter 42 – CarrierIDOffset
“ECID_43”  parameter 43 – CarrierIDLength
“ECID_44”  parameter 44 – FixedMID
“ECID_45”  parameter 45 – MIDFormat
“ECID_99”  parameter 99 – Customer settings
Head Attribute Definitions: *
“HeadStatus” The current state
“HeadID” Head number 01-05 (2 digits)
* In case of a HF5x Transponder Reader, the head attribute definition
“HeadStatus” is equal to the “OperationalStatus” of the CIDRW. The
“HeadID” is equal to the antenna connector.
Where used: S18F1, S18F3