User's Manual

SERVICE AND ERROR HANDLING 6
115
HF5x Transponder Reader (SECS1-Protocol), Release 1.4
6 SERVICE AND ERROR HANDLING
6.1 General
 The transponder reader and its components must be serviced by the
manufacturer only.
 If errors occur, follow the instructions in this section. Do not carry
out any error eliminating measures other than the ones described in
this section.
 If you are uncertain about errors and their handling, contact the
manufacturer (see the contact information on page 119 of this
manual). Have the serial number of the transponder reader ready as
shown on the label (see page 20) when contacting the manufacturer.
6.2 Qualified Error Handling Personnel
Error handling shall be carried out by specially trained personnel only.
If you are uncertain about the qualifications that are required, contact
the manufacturer.
Error handling the device without the special skills required
and unqualified interference with the device can result in
personal injury and damage to the reader and/or connected
devices!