User's Manual

SAFETY INSTRUCTIONS 2
9
Transponder Reader – CF-Card, Release 1.1
2.2 General Safety Instructions
1 Read and understand all safety and operating instructions
before installing and operating the device.
2 Keep these instructions. Store this manual in a place that can
be accessed at any time by all persons involved in installing,
operating and error handling the device.
3 Heed all warnings. Follow all warnings on the device and in
the operating instructions.
4 Install in accordance with the manufacturer's instructions
only.
5 Only use attachments, accessories and connecting cables
supplied by the manufacturer.
6 People with hearing aids should remember that radio signals
transmitted by the device might cause a very unpleasant
buzzing noise in their hearing aids.
7 When you disconnect a cable, pull on its conductor and not on
the cable itself. Keep the connector evenly aligned to avoid
bending any connector pins. When you connect a cable,
ensure that the connector pins are positioned correctly.
8 Never over bend the antenna cable or expose it to mechanical
loads.
9 When replacement parts are required, use the replacement
parts specified by the manufacturer only. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
2.3 Proper Use
This product was developed for reading and writing the TIRIS
®
transponder only. Any other use of this device would constitute abuse
and would render the user’s authority to install and operate the device
invalid.