User's Manual

Brooks Automation
260301 Revision A 83
ATR60LF RFID Reader CAN Bus 8 Service and Troubleshooting
Product Manual 8.4 Error Codes
8.4 Error Codes
8.4.1 SSACK
SSACK Name Description Possible cause Correcting action
NO
Normal
mode
indicates the success of
the operation
requested
- no
EE
Execute
error
transponder data and
read ID sequence can
-
not be read
transponder has no or
too less valid ASCII
characters on MID area
program transponder with valid
ASCII characters on MID area
parameters for MID
area are not matching
transponder data
set reader parameters for MID
area corresponding to transponder
data area for the MID
reader is still busy with
a former read or write
request
wait until the former request is
done
incorrect reader mode
for operation
switch to correct mode (MANT for
writing MID)
CE
Commu-
nication
error
syntax error of mes-
sage ore message for-
mat or incorrect value
data sent with a com-
mand are wrong
check syntax and data of com-
mand
list format, amount of
lists or data type is
wrong
check syntax of SECS message
sent parameter is not
implemented or not
within the range
check syntax and parameter value
HE
Hard-
ware
error
error in the head of the
ID reader/writer, head
of the ID reader/writer
is deactivated