User's Manual
Table Of Contents
- 1 Identification
- 2 Declaration of Conformity
- 3 General Instructions
- 4 Safety Instructions
- 5 Product Specifications
- 6 Installation
- 7 Operation
- 7.1 Operating Personnel
- 7.2 Theory of Operation
- 7.3 Data Items Dictionary
- 7.4 Attribute (ECID and SVID) Values
- AlarmStatus (Read only)
- ASCII_T1 (ASCII only)
- ASCII_T3 (ASCII only)
- BAUDRATE
- CarrierIDLength
- CarrierIDOffset
- CHECKSUM (ASCII only)
- CID_DISPLAY
- CID_E99_PAD
- CID_ERROR
- CID_JUSTIFY
- CID_MAX_LENGTH
- CID_NP_ASCII
- CID_PAD
- Configuration (Read only)
- DeviceID
- DeviceType (Read only)
- DUAL_SENSOR
- ENABLE_EVENTS
- ENABLE_TIMEOUTS (ASCII only)
- EXTENDEDSSACK
- HardwareRevision- Level
- HeadID
- HeadStatus
- HOST_CONT_PORT1 _LED
- HOSTNAME
- MANTWRITEONLY
- Manufacturer
- MDLN
- ModelNumber
- OperationalStatus
- PARITY
- PIP (Read only)
- PIP_AUTOREAD
- PIP_AUTOREAD_ DATA
- PIP_AUTOREAD_ LENGTH
- PIP_SENSOR_ POLARITY
- RADIO_RETRY
- RDA
- RW_ADJUSTMENT
- RW_REPEATTIME
- SELF_TEST_ RESULT
- SENSOR_TIMEOUT
- SERIALNUM
- SerialNumber
- SIGNALSTRENGTH (Read only)
- SW_PARTNUMBER
- SOFTREV
- SoftwareRevision- Level
- STATUS_ENABLE
- TARGETID
- USETESTDIP
- 7.5 Operation of the SECS Protocol
- 8 Service and Troubleshooting
- 9 Dismantling and Storage
- 10 Transport and Disposal
Brooks Automation
82 260301 Revision A
8 Service and Troubleshooting ATR60LF RFID Reader CAN Bus
8.2 Qualified Troubleshooting Personnel Product Manual
8.2 Qualified Troubleshooting Personnel
8.3 Safety Instructions
CAUTION
Error handling shall be carried out by specially trained personnel only. If
you are uncertain about the qualifications that are required, contact
Brooks Product Support.
CAUTION
Error handling the device without the special skills required and
unqualified interference with the device can result in personal injury and
damage to the reader and/or connected devices.
All antenna resonant circuit components carry high voltages.
WARNING
When spare parts are required, use only manufacturer-specified parts.
Unauthorized substitution of parts can result in fire, electric shock or
other hazards.
Electrostatic charges can damage electronic components within the
device.
ESD protective measures must be applied when opening the device (
ESD Instructions).
CAUTION
Never short-circuit the fuse! This may result in fire or damage to the
device.
Only use fuses specified by Brooks.