User's Manual
Table Of Contents
- 1 Identification
- 2 Declaration of Conformity
- 3 General Instructions
- 4 Safety Instructions
- 5 Product Specifications
- 6 Installation
- 7 Operation
- 7.1 Operating Personnel
- 7.2 Theory of Operation
- 7.3 Data Items Dictionary
- 7.4 Attribute (ECID and SVID) Values
- AlarmStatus (Read only)
- ASCII_T1 (ASCII only)
- ASCII_T3 (ASCII only)
- BAUDRATE
- CarrierIDLength
- CarrierIDOffset
- CHECKSUM (ASCII only)
- CID_DISPLAY
- CID_E99_PAD
- CID_ERROR
- CID_JUSTIFY
- CID_MAX_LENGTH
- CID_NP_ASCII
- CID_PAD
- Configuration (Read only)
- DeviceID
- DeviceType (Read only)
- DUAL_SENSOR
- ENABLE_EVENTS
- ENABLE_TIMEOUTS (ASCII only)
- EXTENDEDSSACK
- HardwareRevision- Level
- HeadID
- HeadStatus
- HOST_CONT_PORT1 _LED
- HOSTNAME
- MANTWRITEONLY
- Manufacturer
- MDLN
- ModelNumber
- OperationalStatus
- PARITY
- PIP (Read only)
- PIP_AUTOREAD
- PIP_AUTOREAD_ DATA
- PIP_AUTOREAD_ LENGTH
- PIP_SENSOR_ POLARITY
- RADIO_RETRY
- RDA
- RW_ADJUSTMENT
- RW_REPEATTIME
- SELF_TEST_ RESULT
- SENSOR_TIMEOUT
- SERIALNUM
- SerialNumber
- SIGNALSTRENGTH (Read only)
- SW_PARTNUMBER
- SOFTREV
- SoftwareRevision- Level
- STATUS_ENABLE
- TARGETID
- USETESTDIP
- 7.5 Operation of the SECS Protocol
- 8 Service and Troubleshooting
- 9 Dismantling and Storage
- 10 Transport and Disposal
Brooks Automation
260301 Revision A 49
ATR60LF RFID Reader CAN Bus 7 Operation
Product Manual 7.4 Attribute (ECID and SVID) Values
Manufacturer Returns “Brooks”
MDLN Brooks model number of Gateway or reader (Head)
Up to 6 bytes
ModelNumber See MDLN
OperationalStatus IDLE or MANT
Read only. To change the operational status use S18F13.
PARITY Parity of the serial communication port
0 = no parity
1 = even parity
2 = uneven parity
Default: 0
PIP (Read only) Pod-in-place status.
Shows whether the PIP sensor is ON or OFF.
POD_ARRIVED - PIP sensor is occupied
POD_REMOVED - PIP sensor is released
PIP_AUTOREAD Auto-read ON or OFF
ON = on
OFF = off
Default: ON
PIP_AUTOREAD_
DATA
The memory type to read pod-in-place events.
Value Byte offset of DATA area or MID
Value MID, 00 - 119 (one byte less than size of available DATA area)
Default: MID
IMPORTANT
This attribute should be modified with respect to
PIP_AUTOREAD_LENGTH and the size of the DATA area.