User's Manual

Brooks Automation
48 260301 Revision A
7 Operation ATR60LF RFID Reader CAN Bus
7.4 Attribute (ECID and SVID) Values Product Manual
removal event (S18F75) with MID of the tag. The external LED2 stays ON
during read (HOST_CONT_PORT1_LED=ON)
Range: ON or OFF
Default OFF
ENABLE_EVENTS Enable events (pod arrival/removal and power-up)
ON = Events are generated
OFF = Events are not generated
Default: ON
ENABLE_TIMEOUTS
(ASCII only)
Enable communication timeouts.
ON = Timeout events are generated
OFF = Timeout events are not generated
Default: ON
EXTENDEDSSACK Enables the extended error codes in SSACK. The SEMI standard specifies
only five codes (NO, EE, CE, HE and TE). When this option is ON,
manufacturer-specific codes might be generated. Please see SSACK for all
error codes.
ON = All error codes are generated
OFF = Only SEMI standard error codes are generated
Default: ON
HardwareRevision-
Level
Subsystem hardware revision of Gateway or reader (Head).
Up to 8 bytes
HeadID Returns the HeadID or TargetID.
Two digits
HeadStatus IDLE or MANT
HOST_CONT_PORT1
_LED
If set to ON, the host can control external LED's through S18F13 command.
Range: ON or OFF
Default: OFF
HOSTNAME The network option HOSTNAME.
ASCII string of maximum 15 characters to identify the reader in a network.
Default: “ATR60LF CAN”
MANTWRITEONLY If this attribute is enabled, MID (CID) and data is read and written
according to the E99 standard.
EN = Enabled
DI = Disabled
Default: EN