User's Manual

Brooks Automation
42 260301 Revision A
7 Operation ATR60LF RFID Reader CAN Bus
7.3 Data Items Dictionary Product Manual
Equipment model number, maximum 6 bytes
Where used S18F2
SECS message block header associated with message block in error.
Where used S9F3, S9F5, S9F7, S9F9
MaterialID/CarrierID is a configurable field on the reader side.
CarrierIDOffset, CarrierIDLength, CID_MAX_LENGTH determines MID.
Where used S18F10, S18F11
Software revision code, maximum 6 bytes.
Where used S1F2
SSACK acknowledge code, 2 bytes.
If there is more than one error in a message, this code represents the first
error.
NO - Normal operation
CE - Communication error, could not communicate with the transponder
TE - Transponder error, could not write to the transponder, RFN only
HE - Hardware error, cannot communicate to the RFN
EE - Execution error
If EXTENDEDSSACK is ON ( Attribute (ECID and SVID) Values), the
following error codes are also returned. However, these codes are not
defined by the SEMI standard and are manufacturer-specific.
01 - Wrong TargetID
02 - Invalid seg offset
03 - Invalid data length
04 - Data too long
05 - Data length does not match data
06 - Denied, at least one attribute does not exist
07 - Denied, at least one attribute out of range
08 - Not used
09 - Not used
10 - Could not write because transponder is locked
11 - Not used
12 - Not used
MDLN Format: 41
MHEAD Format: 21
MID (CID/CarrierID) Format: 41
SOFTREV Format: 41
SSACK Format: 41