User's Manual
Table Of Contents
- 1 Identification
- 2 Declaration of Conformity
- 3 General Instructions
- 4 Safety Instructions
- 5 Product Specifications
- 6 Installation
- 7 Operation
- 7.1 Operating Personnel
- 7.2 Theory of Operation
- 7.3 Data Items Dictionary
- 7.4 Attribute (ECID and SVID) Values
- AlarmStatus (Read only)
- ASCII_T1 (ASCII only)
- ASCII_T3 (ASCII only)
- BAUDRATE
- CarrierIDLength
- CarrierIDOffset
- CHECKSUM (ASCII only)
- CID_DISPLAY
- CID_E99_PAD
- CID_ERROR
- CID_JUSTIFY
- CID_MAX_LENGTH
- CID_NP_ASCII
- CID_PAD
- Configuration (Read only)
- DeviceID
- DeviceType (Read only)
- DUAL_SENSOR
- ENABLE_EVENTS
- ENABLE_TIMEOUTS (ASCII only)
- EXTENDEDSSACK
- HardwareRevision- Level
- HeadID
- HeadStatus
- HOST_CONT_PORT1 _LED
- HOSTNAME
- MANTWRITEONLY
- Manufacturer
- MDLN
- ModelNumber
- OperationalStatus
- PARITY
- PIP (Read only)
- PIP_AUTOREAD
- PIP_AUTOREAD_ DATA
- PIP_AUTOREAD_ LENGTH
- PIP_SENSOR_ POLARITY
- RADIO_RETRY
- RDA
- RW_ADJUSTMENT
- RW_REPEATTIME
- SELF_TEST_ RESULT
- SENSOR_TIMEOUT
- SERIALNUM
- SerialNumber
- SIGNALSTRENGTH (Read only)
- SW_PARTNUMBER
- SOFTREV
- SoftwareRevision- Level
- STATUS_ENABLE
- TARGETID
- USETESTDIP
- 7.5 Operation of the SECS Protocol
- 8 Service and Troubleshooting
- 9 Dismantling and Storage
- 10 Transport and Disposal
Brooks Automation
260301 Revision A 37
ATR60LF RFID Reader CAN Bus 7 Operation
Product Manual 7.1 Operating Personnel
7Operation
This chapter gives you an overview of the following topics:
Operating Personnel
Data Items Dictionary
Attribute (ECID and SVID) Values
Operation of the SECS Protocol
7.1 Operating Personnel
7.2 Theory of Operation
7.2.1 ATR60LF CAN Reader
The ATR60LF CAN Reader only communicate with the CAN Gateway through
CAN Bus Port. It is backwards compatible with the ATR9100 in CAN Bus
mode. It is up to 31 ATR60LF CAN Readers can connect to the ATR CAN
Gateway via a single host. The host system can address each of the
ATR60LF CAN reader via the Gateway, which makes the Gateway a
transparent system. The Communication between the ATR Gateway and the
multiplexed ATR60LF CAN Reader occurs on the CAN Bus.
CAUTION
The RFID Reader ATR60LF CAN is designed to be operated by specially
trained personnel only. If you have doubts about the required
qualifications, contact Brooks.
Operating the device without special training can result in damage to the
reader and/or connected devices.