User's Manual

Brooks Automation
30 260301 Revision A
6 Installation ATR60LF RFID Reader CAN Bus
6.6 Connecting the RFID Reader Product Manual
6.5.2 Available Antenna Types
Different types of antennas are available on request.
6.6 Connecting the RFID Reader
Connect the antenna to the antenna port ( Rear View) and tune the
antenna.
Connect the reader to a power supply ( Front View) and a Gateway
connection (CAN).
Parallel The illustration
shows the optimal
position of the
transponder if it is
positioned parallel to
the axis of the
antenna.
Perpendicular The illustration
shows the optimal
position of the
transponder if it is
perpendicular to the
axis of the antenna.
ATTENTION
The antenna-connector housing should have no connection to other
objects,
e.g. mounting plate!