User's Manual

Brooks Automation
260301 Revision A 25
ATR60LF RFID Reader CAN Bus 6 Installation
Product Manual 6.1 Safety Instructions
6 Installation
This chapter gives you an overview of the following topics:
  Safety Instructions
  Qualified Installation Personnel
  Unpacking
  Assembly of the Device
  Antenna Installation
  Connecting the RFID Reader
  Power/CAN Bus Connection
  RS232 Connection
  Commissioning
  Input and Output
  DIP Switches
6.1 Safety Instructions
Follow the Instructions in the Safety Chapter
Follow the general safety instructions in the chapter  Safety
Instructions.
CAUTION
The device is designed for indoor use in an industrial setting only.
Installation is only allowed in an interior room at a constant temperature
between 0° C / 32 °F and +50 °C / 122 °F, and a relative humidity
between 25
% and 80 %.
Never use the device near or in water.
Never pour liquids of any type over the device. If the device should
accidentally come in contact with liquid, disconnect it and have it
checked by a technician.
Do not install the device near heat sources such as radiators, heat
registers, stoves or other devices (including amplifiers) that generate
heat.
Do not install the device in a flammable environment.