User's Manual

Brooks Automation
14 260301 Revision A
4 Safety Instructions ATR60LF RFID Reader CAN Bus
4.6 Additional Instructions Product Manual
4.6 Additional Instructions
 Read and understand all safety and operating instructions prior to
installing and operating the device.
 This documentation was written for specifically trained personnel.
The installation, operation and defect management may only be
carried out by specifically trained personnel.
 Retain these instructions. Keep this documentation in a location
that is accessible to all personnel involved with the installation, use
and troubleshooting of the device.
 Observe all warnings. Follow all warnings on and in the device and
in the documentation.
 Install the device only in accordance with Brooks instructions.
 Use only the accessories and cables supplied by Brooks.
 Troubleshooting that is not described in the chapter  Service and
Troubleshooting may only be performed by Brooks.
 People with hearing aids should be aware that the radio signals
emitted by the device can cause annoying noises in the hearing
aid.
 Do not connect the device to power supplies such as normal
household electrical outlets. The device should only be connected
to power supplies as specified in this document.
DANGER
Risk of fire and explosions
Fire and explosions may occur within the vicinity of the device.
Smoking, open flames and fire are strictly prohibited in the vicinity of the
device. Do not store any flammable liquids within the hazardous area.
Keep a fire extinguisher in the vicinity of the device.
WARNING
Warning against electromagnetic radiation
Electromagnetic radiation develops when transmitting and receiving
data.