User's Manual
Table Of Contents
- 1 Identification
- 2 Declaration of Conformity
- 3 General Instructions
- 4 Safety Instructions
- 5 Product Specifications
- 6 Installation
- 7 Operation
- 7.1 Operating Personnel
- 7.2 Theory of Operation
- 7.3 Data Items Dictionary
- 7.4 Attribute (ECID and SVID) Values
- AlarmStatus (Read only)
- ASCII_T1 (ASCII only)
- ASCII_T3 (ASCII only)
- BAUDRATE
- CarrierIDLength
- CarrierIDOffset
- CHECKSUM (ASCII only)
- CID_DISPLAY
- CID_E99_PAD
- CID_ERROR
- CID_JUSTIFY
- CID_MAX_LENGTH
- CID_NP_ASCII
- CID_PAD
- Configuration (Read only)
- DeviceID
- DeviceType (Read only)
- DUAL_SENSOR
- ENABLE_EVENTS
- ENABLE_TIMEOUTS (ASCII only)
- EXTENDEDSSACK
- HardwareRevision- Level
- HeadID
- HeadStatus
- HOST_CONT_PORT1 _LED
- HOSTNAME
- MANTWRITEONLY
- Manufacturer
- MDLN
- ModelNumber
- OperationalStatus
- PARITY
- PIP (Read only)
- PIP_AUTOREAD
- PIP_AUTOREAD_ DATA
- PIP_AUTOREAD_ LENGTH
- PIP_SENSOR_ POLARITY
- RADIO_RETRY
- RDA
- RW_ADJUSTMENT
- RW_REPEATTIME
- SELF_TEST_ RESULT
- SENSOR_TIMEOUT
- SERIALNUM
- SerialNumber
- SIGNALSTRENGTH (Read only)
- SW_PARTNUMBER
- SOFTREV
- SoftwareRevision- Level
- STATUS_ENABLE
- TARGETID
- USETESTDIP
- 7.5 Operation of the SECS Protocol
- 8 Service and Troubleshooting
- 9 Dismantling and Storage
- 10 Transport and Disposal
Brooks Automation
260301 Revision A 13
ATR60LF RFID Reader CAN Bus 4 Safety Instructions
Product Manual 4.4 ESD Instructions
4.4 ESD Instructions
4.5 Residual Risks
Even if all precautions have been taken, there may be unapparent residual
risks!
Adhering to the safety instructions, the intended use and the operating
instructions as a whole can reduce residual risks!
CAUTION
Static electricity can damage electronic components in the device. All
persons installing or maintaining the device must be trained in ESD
protection.
ESD protective measures must be applied when opening the device.
Disconnect the power supply prior to removing or adding
components!
Discharge your body and all tools used prior to touching any
components on the interior of the device!
Touch electronically sensitive parts carefully and only at their
corners!
DANGER
Risks from electric current
Electrical energy remains in lines, equipment and devices even when the
device is switched off.
Only allow qualified electricians to perform work on the electrical supply
system.
ATTENTION
Disconnect the device from the power supply system if active parts of
the device can be accessed with tools. Access is only permitted for
authorized personnel.
Regularly check the electrical equipment of the device. Regularly check
all moving cables for damage within the scope of maintenance and
repairs.