User's Manual

Brooks Automation
12 260301 Revision A
4 Safety Instructions ATR60LF RFID Reader CAN Bus
4.3 Obligations Product Manual
4.3 Obligations
4.3.1 Operating Company's Obligations
The safe condition and use of the device is a requirement for the safe
operation of the device. The company operating the device therefore has
the obligation to ensure that the following points are adhered to:
4.3.2 Operating Personnel's Obligations
Operators are obligated to contribute to the prevention of work accidents
and the consequences of them by their personal conduct.
 The device may only be operated by trained and authorized
personnel!
 Prevent unsafe and/or dangerous work procedures! If
necessary, check employees' actions!
 Only permit personnel to be trained or instructed within the
scope of general training on the device under the supervision
of an experienced person!
 Personnel must have understood the operating instructions.
Have this confirmed by signature!
 Precisely establish responsibilities according to the various
task areas (operation, installation)!
 Operating personnel must be committed to immediately
reporting to their superior any identifiable safety deficiencies
which occur!
WARNING
Risk of injuries due to insufficient personnel qualifications
A risk exists for personnel and the proper operation due to insufficiently
qualified personnel.
Only trained personnel may operate the device. New operators must be
instructed by the current operating personnel. The operating company
must precisely regulate and monitor the personnel's areas of
responsibility and competence.
Personnel for the areas of responsibility mentioned above must have the
corresponding qualification for this work (training, instructions). If
necessary, this can be done by Brooks on behalf of the operating
company.
All warranty claims are void when disregarded.