User's Manual

Brooks Automation
10 260301 Revision A
4 Safety Instructions ATR60LF RFID Reader CAN Bus
4.2 Area of Application and Symbols Product Manual
4.2 Area of Application and Symbols
The device was constructed according to state-of-the-art technology and
recognized safety regulations. In order to prevent any risks to life and limb
of the user, third parties or damage to the device, only use the device for its
intended purpose and in perfect condition with regard to safety.
Bodily injuries and/or property damage resulting from non-compliance with
the instructions given in the operating instructions are the responsibility of
the company operating the device or of the assigned personnel.
Malfunctions that could compromise safety must be eliminated
immediately.
4.2.1 Safety Symbols - in Compliance with DIN 4844-2
Special safety symbols in accordance with DIN 4844-2 are used in the
corresponding passages in the text of these operating instructions and
require special attention depending on the combination of signal word and
symbol.
4.2.2 Warning Symbols
DANGER
Danger to Life, Risk of Injuries or Loss of Property
Risks exist when disregarding the operating instructions and the safety
instructions therein.
Carefully read the operating instructions before initial commissioning.
Perform the required safety measures before initial commissioning.
Follow the general safety information as well as the special safety
information given in other chapters.
WARNING
Risk of Injuries When Disregarding Safety Symbols
Risks exist when disregarding warnings in the operating instructions.
Please heed the warnings.
Warning: Hazardous
area
Warning against
hazardous electrical
voltage
Warning against
electromagnetic
radiation
Warning: Flammable
materials