Installation Guide

/2410
STEP-2
ASSEMBLY
MODEL # AXCBSACA07-WH
1. Align Wood Dowels with guide holes and attach Divder H to Middle Shelf D .
2. Use two Phillips Screws 8 to attach Middle Shelf D through guide holes from
Middle Shelf D to pre-drilled holes of Divider H .
3. Use Phillips screwdriver to secure Screws. Do not over-tighten.
8
8
Front / Avant
Front / Avant
H
D
D
H
4
10
10
4. Attach Magnets 4 using Phillips Screws 10 into pre-drilled holes Divider H .
5. Use
Phillips screwdriver
to secure screws
. Do not over-tighten.