TM SIMP HOME ® LIFE BY DESIG N TM ACADIAN / NORMANDY / BRUNSWICK SPACE SAVER CABINET MODEL # AXCBSACA07-WH 1/24
TM SIMP HOME ® LIFE BY DESIG N TM Questions, problems, assembly help, missing parts? No need to return the product, we will gladly help and ship your replacement parts free of charge Please call Customer Service at 1-866-518-0120 ext. 262 Monday to Friday between 9 am –4 pm EST or go to www.simpli-home.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION CAUTION: Injuries and damage can occur from furniture tip over if product is not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided with the product. Consult our assembly instructions for help.
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. CARE and MAINTENANCE Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally along different grain directions.
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION A MODEL # AXCBSACA07-WH . . BL BR Fron t Fron Fron vant t/A t/A ant / Av TOP QTY 1 TOP LEFT SIDE QTY 1 . . CL t/A t/ Fron Fron nt Ava van t BOTTOM RIGHT SIDE QTY 1 . MIDDLE SHELF QTY 1 . F BOTTOM SHELF QTY 1 vant t/A BOTTOM LEFT SIDE QTY 1 E D Fron nt / Ava . TOP RIGHT SIDE QTY 1 .
PRE-ASSEMBLY INFORMATION . PART DESCRIPTION H t Fron MODEL # AXCBSACA07-WH . . I J ant / Av DOOR (L&R Same) QTY 2 DIVIDER QTY 1 . . JL . JR LEFT BACK PANEL QTY 1 BOTTOM BACK PANEL QTY 1 K RIGHT BACK PANEL QTY 1 SHELF QTY 2 NEED HELP? For help with assembly or if you are missing a part, Please call customer service at 1-866-518-0120 ext.
PRE-ASSEMBLY INFORMATION . HARDWARE DESCRIPTION 1 2 . CAM LOCK PIN CAM LOCK QTY 16 SETS . MODEL # AXCBSACA07-WH . 3 WOOD DOWEL Ø8 X 30mm QTY 13 . 5 . QTY 2 . . 8 . 11 PHILLIPS SCREW M3 X 15mm QTY 24 PHILLIPS SCREW M4 X 50mm QTY 6 SHELF SUPPORT QTY 8 . 10 PHILLIPS SCREW M4 X 15mm QTY 8 MAGNET AND PLATE QTY 2 SETS 7 HANDLE M4 X 25 mm QTY 2 SETS BRACKET 9 4 HINGE QTY 4 6 . . 12 PHILLIPS SCREW ROUND HEAD M4 X 15mm QTY 27 M a.4X25mmQ - TY2 1(siextra) M b.4X15mmQ - TY1 M c.
COMPONENTS-KEY DIAGRAM / nt Fro MODEL # AXCBSACA07-WH nt Ava A F nt Fro /A t van JR n Fro t/ Ava JL nt K I BL K I H BR D / nt J nt Ava Fro E CL CR G 8/24
ASSEMBLY MODEL # AXCBSACA07-WH P STEP-1 X 1 1 Fron t/A vant BR 1 1 1 Fron 1 Fron t/A van t t/A vant A BL 1. Attach Cam Lock Pins 1 into pre-drilled holes on each part A , BL , BR . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten. F 2 Fron 2 t/A vant H 2 3. Insert Dowels 2 into guide holes on parts F , H . 4. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of Dowels should be exposed.
ASSEMBLY MODEL # AXCBSACA07-WH STEP-2 8 Front / Avant H D 8 1. Align Wood Dowels with guide holes and attach Divder H to Middle Shelf D . 2. Use two Phillips Screws 8 to attach Middle Shelf D through guide holes from Middle Shelf D to pre-drilled holes of Divider H . 3. Use Phillips screwdriver to secure Screws. Do not over-tighten. Front / Avant H 4 10 D 10 4.AttachMagnets4usingPhilpsScrews10intopre-driledholesDividerH. 5. Use Phillips screwdriver to secure screws. Do not over-tighten.
ASSEMBLY MODEL # AXCBSACA07-WH STEP-3 Front / Avant BL Front / Avant F H D 1. Align Wood Dowels with guide holes on part BL and attach part F to Left Side BL . 2. Align Cam Lock Pins with guide holes on part D and attach part D to Left Side BL . 1 Front / Avant BL Front / Avant F 1 H D 3. Insert two Cam Locks 1 into guide holes on part D . 4. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBSACA07-WH Front / Avant STEP-4 BR Front / Avant F H D Front / Avant F Front / Avant BL BR 1 H D BL 1 1. Repeat Step-3 for the Right Side BR .
ASSEMBLY MODEL # AXCBSACA07-WH Front / Avant STEP-5 Front / Avant BL A Front / Avant H BR Front / Avant Front / Avant 1. Align Cam Lock Pins with guide holes and attach part A to Sides BL , BR , H . Front / Avant BL Front / Avant A Front / Avant H BR 1 2. Insert two Cam Locks 1 into guide holes on each part BL , BR , H . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBSACA07-WH P STEP-6 1 X 1 1 2 CL Fron t/A vant 1 2 1 CR Fron t/A vant 2 2 2 G 1. Attach three Cam Lock Pins 1 into pre-drilled holes on each part CL , CR . 2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten. 3. Insert Dowels 2 into guide holes on parts G , CL , CR . 4. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of Dowels should be exposed.
ASSEMBLY MODEL # AXCBSACA07-WH Front / Avant Front / Avant STEP-7 E CL G 1. Align Wood Dowels and Cam Lock Pins with guide holes and attach parts E , G to part CL . 1 1 E CL G 2. Insert Cam Locks 1 into guide holes on parts E , G . 3. Use Phillips screwdriver to secure Cam Locks.
ASSEMBLY MODEL # AXCBSACA07-WH STEP-8 Front / Avant CR Front / Avant E G CL 1 1 CR E G CL 1. Repeat Step-7 for the Bottom Right Side CR .
ASSEMBLY MODEL # AXCBSACA07-WH STEP-9 Front / Avant 9 Front / Avant 5 8 Front / Avant 1. Align Wood Dowels with guide holes on top fame and attach top frame to bottom frame. 2. Use four Phillips Screws 8 into guide holes on bottom fame . 3.AttachBracket5usingPhilpsScrews9intopre-driledholesontopframe andbottomframe. 4. Use Phillips screwdriver to secure Screws. Do not over-tighten.
ASSEMBLY MODEL # AXCBSACA07-WH Note: Thebackofthecabinetframedoesnothave pre-driledholestoattachthebackpanels. STEP-10 Fron Warning Label t/A vant JR JL J 11 1. Attach the Back Panels J , JL , JR to back frame using Phillips Screws Round Head 11 through guide holes from Back Panels. 2. Use Phillips Screwdriver to tighten screws. Do not over-tighten.
ASSEMBLY MODEL # AXCBSACA07-WH STEP-11 K K 7 7 1. Use four Shelf Supports 7 for each Shelf K in desired location .
ASSEMBLY MODEL # AXCBSACA07-WH STEP-12 6 6 4 10 I I 3 10 1.AttachHinges3toDoorsIusingPhilpsScrews10intopre-driledholesonDoorsI. 2.AttachMagnetPlates4totopcornerofDoorsIusingPhilpsScrews10into pre-driledholesonDoorsI. 3. UsePhilpsscrewdrivertoattachHandle6toDoorsI.
ASSEMBLY MODEL # AXCBSACA07-WH STEP-13 I BL I BR 10 1.AttachHingesonDoorsItoSidesBL,BR usingPhilpsScrews10intopre-driledholesonSidesBL,BR. 2. Use Phillips screwdriver to secure screws. Do not over-tighten.
FURNITURE TIP OVER RESTRAINT ASSEMBLY WARNING Serious or fatal crushing injuries can occur from furniture tip-over. If the furniture tip over restraint kit is not in the box, please contact our customer service department in order to obtain another kit before using the furniture. STEP-14 NOTE: The screwdriver is not included in the hardware pack.
FURNITURE TIP OVER RESTRAINT ASSEMBLY Furniture Tip Over Restraint Instructions: 1. Attach one of the mounting brackets securely to the back edge of the furniture. Use the shorter screw. x P 2. Determine where furniture is to be placed and mark location on the wall for mounting bracket screw hole approximately 2 inches below the bracket mounted to the furniture. x 3. 4. 5. 6. 7. P Drill a 3/16 inch hole in the wall.
TM SIMP HOME ® LIFE BY DESIG N TM WARRANTY Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line at 1-866-518-0120 ext.
