Installation Guide

/1613
STEP-7
ASSEMBLY
MODEL # AXCBCGAT-05
63
5
46
H
1. Attach Hinges 3 to Door H using Phillips Screws 6 into pre-drilled holes on Door H .
2. Attach Magnet Plate 4 to top corner of Door H using Phillips Screws 6 into
pre-drilled holes on Door H .
3. Use Phillips screwdriver to attach Handle 5 to Door H .
H
BR
6
4. Attach Hinges on Door H to Side BR
using Phillips Screws 6 into pre-drilled holes on Side BR .
5.
Use
Phillips screwdriver
to secure screws
. Do not over-tighten.