Installation Guide

/168
STEP-1
ASSEMBLY
MODEL # AXCBCGAT-01
P
X
1
Front /
Avant
Front /
Avant
5
4
1. Attach Cam Lock Pins 1 into pre-drilled holes on each part BL , BR .
2. Attach Magnet 4 using Phillips Screws 5 into pre-drilled holes Left Side BL .
3. Use Phillips screwdriver to secure Cam Lock Pins and Scews. Do not over-tighten.
4. Insert Dowels 2 into guide holes on parts E , F .
5. Use rubber mallet to tap Dowels 2 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
BL
BR
E
F
1 1
1
1
1
2