Installation Guide

/1613
STEP-7
ASSEMBLY
MODEL # AXCBCGAT-01
1. Attach Hinges 3 to Door H using Phillips Screws 5 into pre-drilled holes on Door H .
2. Attach Magnet Plates 4 to top corner of Door H using Phillips Screws 5 into
pre-drilled holes on Door H .
3. Use Phillips screwdriver to attach Handle 6 to Door H .
STEP-8
3
5
4
6
5
H
1. Attach Hinge on Door H to Right Side BR using Phillips Screws 5 into pre-drilled
holes on Right Side BR .
2.
Use
Phillips screwdriver
to secure screws
. Do not over-tighten.
5
H
BR