Instructions / Assembly

ASSEMBLY

STEP 3

1. Insert Dowel 6 into Divider C .

2. Use rubber mallet to tap Dowels 6 into bottom of holes securely. 1/2 length of

Dowels should be exposed.

3. Align drilled holes on bottom of Front D with Dowel 6 on Divider C .

4. Using 2 Phillips Screws 8 to attach Divider C to the middle bar on Front D .

NOTE: The screwdriver is not

included in the hardware pack.

10/15

MODEL # AXCAB-BNCH-W

e / Ver