Manualshelf

Installation & Assembly

ManualsBrandsBronco Hardware ManualsBarn Door HardwareModern Standard Double Barn Door Hardware Kit
123456789
9
Step 10.
1. Slide the door to the side so the door way is cleared.
2. Position the floor guide at the centered in the channel.
3. Mark the center holes of the floor guide and put it aside.
4. Take a drill with 7/32” drill bit and drill the holes that you marked.
5. Insert the plastic anchors into the holes and then position the floor guide with
the holes. Finally, insert the screw and tighten the screw with a Philips
screwdriver.
Installation Complete!