Installation & Assembly

7
Step 6.
Drill the holes like the above diagram for the door hanger/roller. The distance
from the top of the door to the center of the first hole is 1 5/8”. The distance
from the side door edge and the roller is at your personal preference. However,
it should be at least 1” away from the door edge to prevent any damage to your
door. Lastly, install the hex bolts and the nuts just like in the diagram above. If
you purchased the black wheel door hanger, the measurement are the same.
Step 7.
Use a Phillips screwdriver to install the anti-jump pads on top of the door. Wood
screws are in the bag with the anti-jump pads and you can use the the
screwdriver to tighten it through the hole.