Installation & Assembly

6
Step 4.
Insert a lag bolt with a washer and then go through the track to a spacer just
like the above picture. Then, line up with the holes that you drilled previously.
Lastly, tighten the bolts with 1/2’’ hand wrench/power socket ranch. Repeat the
steps for the remaining holes.
Step 5.
Cut a slot underneath the door for 1/4” wide and 1” deep by using a router. This
is use for fit in the floor guide. If you are not comfortable cutting the groove or
do not have a router, please visit broncohardwareshop.com for other guide
option purchase.